Categories: Uncategorized

Repair and introduction of ureter endoscope

The ureter endoscope is small in diameter and 35 to 45 cm long.Endoscopic ureteral surgery is through an elongated endoscope, through the urethra, bladder, and ureter mouth into the 0.2 to 0.5cm diameter ureter. Under direct vision or with the help of a television monitoring system, the lesions in the ureter can be clearly observed, such as stones, tumors, etc., To diagnose and treat ureteral diseases.

Ureteroscopy is a medical equipment used in urology treatment. It uses ureteroscopy to diagnose and treat ureteral diseases, which greatly improves the level of diagnosis and treatment of ureteral diseases, shortens the patient’s hospitalization time, reduces the cost of treatment, and can obtain satisfactory results clinically.

What are the types of ureteroscopy?

Ureteroscopes can be divided into two categories: rigid endoscopes and soft endoscopes.

Rigid endoscopy of the ureter can be divided into long endoscopy of the ureter (40-1150px) and short endoscopy of the ureter (875px) according to the length.According to the diameter and thickness, it can be divided into thick endoscopy of the ureter (12.5F-13.5F) and thin endoscopy of the ureter (6.9-9.4F).The short endoscope is mainly used for the diagnosis and treatment of diseases of the lower ureter.

Soft ureteral endoscopes, which are what we call fibrous ureteral endoscopes, are divided into active curved and passive curved.The soft endoscope is mainly used to observe the internal structure of part of the kidney and the upper ureter.

Clinical application of rigid endoscopy of ureter:

1.Diagnosis and treatment of ureteral stones

2.Diagnosis and treatment of renal pelvic stones

3.Diagnosis and treatment of ureteral epithelial tumors

4.Treatment of ureteral stenosis

5.Removal of foreign objects in the ureter

Common faults in ureteroscopy repair:

1. Image conditions: water, shadows, blur, dust;

2. Optical fiber: yellowing, burning, lack of brightness.

3. Endoscope tube: bending, breaking, depression, falling off;

4. Instrument channel: wear, collapse, deformation;

5. Objective lens: degumming, wear, shedding;

6. Light cone: burning, blackening, yellowing, falling off and missing;

7. Mirror bridge components: falling off, bayonet broken;

8. Ocular  lens protective lens broken, broken, missing, missing;

9. Eyepiece: cracked or missing;

ureteroscopy repair plan:

1. Replace the internal optical components;
2. Replace Optical fiber;
3. Replace Endoscope tube;
4. Replace the equipment channel;
5. Replace the objectives;
6. Replace the light cone;
7. Replace the mirror bridge assembly;
8. Replace the ocular  lens protective le
9. Replace the eyepiece;

admin